1. Lubricating oil should be added before installing and using the steel bar hoop bending machine, and check whether the screws of the whole machine and electrical appliances are loose or damaged during transportation.
2. During installation, the machine should be equipped with a leakage protection switch and grounded.
3. The motor rotates clockwise when working, and the motor rotates counterclockwise when returning.
4. According to the diameter of the bending stirrup, adjust the gap between the bending arm and the central retaining column, and adjust the parallelism between the retaining plate and the bending workpiece.
5. According to the size of the bending angle, adjust the positioning pin on the angle plate to make it reach the required angle.
